The steps for resetting the maintenance lamp of Dongfeng Peugeot 408 to zero are as follows:
1. Turn off the ignition switch of sign 408.
2. Then press and hold the "000" single mileage reset button.
3. Turn on the ignition switch, and the odometer starts to count down at this time.
4. When the indicator shows "initialization completed" or "=0", it means that the maintenance indicator has been reset to zero.
5. Finally release the button, the wrench symbol (maintenance indicator) will disappear.
The system of Dongfeng Peugeot 408 will appropriately shorten the maintenance interval mileage and time according to your driving habits. , But if there is no maintenance for more than 6 months or the distance from maintenance is less than 1000km, the wrench symbol will still light up. Even if the wrench symbol is on, we can eliminate it by ourselves, but it does not mean that the car can extend the maintenance time. The maintenance light only serves as a reminder. When the maintenance light is on, go to the sign as soon as possible. Authorize the service shop for maintenance.
It is worth mentioning that after the maintenance in the 4S shop, the maintenance staff will use a professional car computer tester to come in to maintain the lamp reset. If the wrench symbol is still there after we take the car, it may be that the staff has forgotten this step. Operation, then we need to do as mentioned above.